Call Us: 1 (800) 433-5544

shopping cart

Omega Insert for The Magic Tube

More Views

Depending on your design and the number of strands in it, there are several ways to multi strand your designs using the Magic Finding, the two main ways are:

1) Going back and forth with only one piece of beading string between two or more Magic Findings. For an example of this see the blue beading string in the above demo.

2) Using one or more additional beading strings between two or more Magic Findings as seen in the red beading string in the above demo.

In necklaces, bracelets and anklets make sure that the ends of your beading string go through the Magic Finding at least 2 times for maximum strength, as seen in the pictures below and in the above demo.

Once you have assembled your design, crimp it into a round bead shape using The Patent Magic Forming Pliers as seen in the video at the bottom on this page
The Magic Finding has 7 holes that can be used to connect many
different things to your jewelry designs.
Connect things to the Magic Finding by inserting any combinations of
the following inserts into the holes of your Magic Finding; beading
string, head pins, eye pins, Omega inserts and metal wire.

It is important that every time you crimp with your pliers to always push and hold the Omega Insert in The Magic Finding
before and during the crimping process.

To avoid marking the omega inserts with you pliers; make sure that the Magic Finding is centered and well
seated in the concave holes of the pliers before you crimp.

Make sure you keep about 1/8" to 1/4" space between your beads and your Magic Finding with an omega insert assembled in it when you crimp your finding.

If your Magic Finding has an Omega Insert in it, make sure the Omega is fully inserted in the Magic Finding, so that the ends of the Omega Insert stick out.

Each time you crimp the Magic Finding with Omega Inserts, press the Omega Insert with your finger so that the ends keep sticking out. If at any time the ends of the Omega Insert slip back in to the Magic Finding press them back out before proceeding.

If your design has an Omega Insert in it , make sure the
Omega runs parallel to the jaws of The Patented Magical Crimp Forming Tool when you FIRST crimp the Magic Finding. After you have first crimped the Omega Insert in a parallel position to the pliers, you can then rotate it 90 degrees and continue crimping it. Do not crimp the Magic Finding until all components have been attached.

 

 

WARNING: California's Proposition 65

 

Proposition 65

×

These products can expose you to chemicals including one or more of the following: Tetrabromobisphenol A (TBBPA), Bisphenol A (BPA), and Di(2-ethylhexyl)phthalate (DEHP) which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,go to www.P65Warnings.ca.gov

Diamension(mm)8.31x5.03
MetalSterling Silver
0.45 In stock
Omega Insert for The Magic Tube 0.0 out of 1 5 based on ratings. user reviews.
metal price