If you just have to own a Quick Change hand-piece for making frequent changes of 3/32″ shank burs, then this kit is for you. K. 2220 Quick Change Jewelers Kit Includes the following key components:

1. SR Motor - The 1/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It comes equipped with a motor bale for hanging, and a standard 39" long key tip inner shafting for connecting to any of FOREDOM's interchangeable hand-pieces.
2. C.FCT Speed Control - This foot operated speed control has a solid state electronics and comes in a heavy duty plastic housing with an extra wide design
3. H.20 Hand-piece - This "quick change" hand-piece is for exclusive use with 3/32" shank accessories and is popular among jewelers who work with that shank size and make frequent bur changes. Features a molded plastic front grip with tapered sides for easy and close handling. It has pre-lubricated ball bearings that do not require lubrication.
4. Flexible Shaft Grease
5. AK11 Accessory Kit - 43pc assortment of professional jewelers/metal working accessories includes the following

• 1 Rotating Bur Hoder 3/32" w/cup
• 1 Platinum White, 1" Tube
• 6 Radial Bristle Disc, 3/4" dia., Pink, Pumice (1,200 Grit), 6Pk
• 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 60 grit
• 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 80 grit
• 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 120 grit
• 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 220 grit
• 1 Satin Finisher, Fine, 1" dia. x 5/16" thick, Mounted with 3/32" Shank
• 1 Satin Finisher, Coarse, 1" dia. x 3/8" thick, Mounted with 3/32" Shank
• 1 Rubber Bonded Abrasive, Brown, Wheel, 7/8" dia. x 1/8" thick with 1/16" Arbor Hole, Coarse, 40-60 Grit
• 1 Rubber Bonded Abrasive Wheel, 7/8" x 1/8", 120 grit
• 1 Rubber Bonded Abrasive Wheel, 7/8" x 1/8", 180 grit
• 1 CW Polishing Wheel, Orange, 7/8" x 1/8", 500 grit
• 1 CW Polishing Wheel, Gray, 7/8" x 1/8", 1000 grit
• 1 CW Polishing Wheel, White, 7/8" x 1/8", 1500 grit
• 1 Cut Off Disc, 1-1/4" Fiberglass
• 1 Felt Buff, Unmounted 5/8"
• 1 Mandrel, 3/32" shank & 1/16" arbor hole
• 1 Mandrel, LGE HD. 3/32 X 1/16
• 1 Mounted Brush, Cup, Bristle, 3/32" shank
• 1 Mounted Brush, Wheel, Bristle Stiff, 3/32" shank
• 1 Mounted Brush, End, Bristle, 3/32" shank
• 1 Mounted Brush, End, Brass, 3/32" shank
• 1 Mounted Brush, Wheel, Brass, 3/32" shank
• 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank
• 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank
• 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank
• 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank
• 1 Rubber Sanding Drum Mandrel, 1/4" x 1/2",  3/32" shank
• 1 V Stone Point, Cylinder, 1/4" dia. x 1/2" long with 3/32" shank, 80 Grit