Call Us: 1 (800) 433-5544

shopping cart

Castaldo Quick-sil

More Views

Castaldo Quick-sil

Item# 81-260

Be the first to review this product

Shore A Hardness40
Mixed Ratio by Weight1:1
Rubber Shrinkage0.0%
Vulcanizes70˚ F/ 21˚C
Cure Time15 Minutes
Elongation550%
Tensile Strength660 psi 4.1 n/mm²
Tear Strength115 lb./in. 20.1 n/mm
ColorLight Green

Similar Products

Mold-Mate

Out of stock

Castaldo VLT (Very Low Temperature)

Out of stock

logo

No careful and precise mixing needed, just take equal handfuls! Mixing is easy and simple! Mold packing is easy, too! Cures in 15 minutes!

logo

No need to heat up your vulcanizer - use it cold! No vulcanizer? Even C-clamps or a heavy book will do! Quick-Sil molds are strong, tough and long lasting.

logo

 Castaldo Quick-Sil is a revolutionary new 0% shrinkage jewelry molding rubber material that makes tough, long-lasting production malds with a high-shine finish almost instantly.

  • No careful measuring
  • No messy liquids
  • No 12-24 hour wait for finished molds
  • No vulcanizer needed
  • No release sprays needed - it's self lubricating
  • Can be used for direct casting of pewter and other low-temperature metals!

logo

Castaldo Quick-Sil can be used for lost wax casting and can also be used for direct casting of low-temperature metals such as pewter, tin, etc. up to 650˚ F / 345˚  C.

Quick-Sil is available in 100 g / 3.5 oz. kits, 1.0 kg / 2.2 lb. kits and 5.0 kg. / 11.0 lb. kits. Kits include equal amounts of parts A and B.


Using Quick-Sil with Metal Clay

logo

Castaldo Quick-Sil is a two-part putty that is mixed by hand, not a liquid rubber, making it ideal for useres without a vulcanizer or a vacuum pump. It cures to a strong rubber mold in only 15 minutes at room temperatures. Only slight pressure is needed to form the mold and drive out air bubbles. Bench vises, book presses and even C-clamps can be used with good results.

It requires no careful measuring and no messy liquids. and it can be used for direct casting of low-temperature metals such as pewter, lead, tin for making toy soliders, chessmen, fantasy figures, fishing lures and similar items.

It is ideal for use with metal clay too. Either make a clay model and reproduce it 100's of times using Quick-Sil mold, or mold an object in Quick-Sil and then reproduce it im metal Clay. 

Futher Information about Castaldo Quick-Sil

Data Sheet (A)

SDS Safety Data Sheet (A)

Data Sheet (B)

SDS Safety Data Sheet (B)

PDF Document

RTV rubber technical PDF document

Instruction Manual

Quick-Sil˚ Instructions


Shore A Hardness40
Mixed Ratio by Weight1:1
Rubber Shrinkage0.0%
Vulcanizes70˚ F/ 21˚C
Cure Time15 Minutes
Elongation550%
Tensile Strength660 psi 4.1 n/mm²
Tear Strength115 lb./in. 20.1 n/mm
ColorLight Green
49.95 In stock
Castaldo Quick-sil 0.0 out of 1 5 based on ratings. user reviews.
metal price